Backblaze B2 Cloud Sync bucket way larger than dataset
Hello all, Recently I have started using TrueNAS for the first time. My TrueNAS server has been running wonderfully for about a month now. I have decided to make offsite backups to Backblaze B2. A...
View ArticleTrueNAS-13.0-U6 - Vlan problems.
I can't put the same vlan on 2 physical interfaces. I've tried everything here on the forum but I can't. Once I assign the vlan on one physical interface I only manage to put it on the other, it keeps...
View Articlehad an unscheduled system reboot
Hi, Looked at a few threads about unscheduled reboots but couldn't see any troubleshooting steps to get to the bottom of the issue as most of them were issues with dodgy RAM or PSUs. Any help is...
View ArticlePerformance test
Hello, Just finished building a new 8x10TB Mini NAS for file backups. However, I'm interested in knowing the following: - How do i test my network speed? iperf right? - How do i test my drive/pool...
View ArticleResilver performance on TrueNAS 13.0-U6
Hi, recently on one of my TrueNAS I got a fault NVMe drive used for logs and cache, so I changed the faulted drive with a new one, cloned partitions structures and made a zfs replace on the faulted...
View ArticleHelp with unscheduled system reboot
Hi all, i need some help to troubleshooting a strange behavior is occurring in my machine. TrueNAS-13.0-U6 (Core) Mainboard Asus P8 H61-M LX R2.0 CPU I5 3550S 2x8GB RAM 1600mhz NO-ECC 1 Pool with 2x1...
View ArticleLower IOPS than expected / slow small file transfer through SMB
I've got the following setup: Disks here are Seagate IronWolf 12 TB hard disks (ST12000VN0008) I've got a test folder of representative production data, which I copy over SMB. This folder is 2.2GB,...
View ArticleZFS "ARC" is getting smarter with version 2.2+ :smiley_face_emoji:
This is a continuation and update of this thread: ZFS "ARC" doesn't seem that smart... Without yet resorting to adding an L2ARC, is there a "tuneable" that I can test which instructs the ARC to...
View ArticleDefinitive detailed tshooting poor R/W throughput
I'm at the limit of what I believe I can see here, and while there are a couple of additional things I need to do to rule out/isolate hardware, my intent here is to gain insight into things I either...
View Articlelarge folders via SMB just hard-dismount under OSX Ventura
Sadly I can report that the issue being discussed here (but that I can not respond to anymore) is still happening after all these years. I'm now on a brand new M2 MP and over 10Gb ethernet it's still...
View ArticleSMB and "birth" date on Linux client
I haven't been able to find much on this, but the issue I am seeing is that file birth times are not visible on Linux via CIFS. I am running TrueNAS Core 13.0 U5.3 (x11sae-m w/ xeon e3-1240L v5, 32GB...
View ArticleNVMe Autonomous Power State Transition (APST) - Not Working in CORE, Works in...
So I'm playing around with APST (I had a slow day thankfully). I noticed when I'm using SCALE, the power states will shift around depending on what the drive (1TB EX900 Plus M.2) needs to perform. Do...
View ArticleRidiculously slow transfer speeds (2-3MBit/s)
I am new to TrueNAS just over the last few months set up a system and learning as I go. I had hardware issues with the motherboard on the (15 year old) PC I was using, so I got a slightly newer one and...
View ArticleMacOS showing scrambled images since SONOMA update
Hello all, I have been running succesfully a CORE server for a year now, It's a small network accessed by both windows and MacOS computers. Since the last upgrade to MACOS SONOMA images do not open...
View ArticleCache and/or RAM? Am i dumb?
Hello all, referring to my first posts on this forum, I finally completed and happily run my new NAS for about a month. This is my configuration: Ryzen 7 5700g 128gb ram 2x 128gb SSD as boot-pool 2x...
View Article